dmesg - 2016-02-03 08:22

Return To 2016-02-03 08:22 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.1.2.0.1.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Dec 13 13:06:13 UTC 2013
Command line: ro root=LABEL=/ console=ttyS0 xen_blkfront.sda_is_xvda=1 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000f0000000 (usable)
 BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xFBB80
DMI: Xen HVM domU, BIOS 4.2.amazon 12/07/2015
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x110000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-combining
  C0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 0000F0000000 mask 3FFFF8000000 uncachable
  1 base 0000F8000000 mask 3FFFFC000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xf0000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000f0000000
 0000000000 - 00f0000000 page 2M
kernel direct mapping tables up to f0000000 @ 8000-d000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000110000000
 0100000000 - 0110000000 page 2M
kernel direct mapping tables up to 110000000 @ b000-d000
RAMDISK: 36f9c000 - 37fef395
ACPI: RSDP 00000000000ea020 00024 (v02    Xen)
ACPI: XSDT 00000000fc00f5a0 00054 (v01    Xen      HVM 00000000 HVML 00000000)
ACPI: FACP 00000000fc00f260 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
ACPI: DSDT 00000000fc0035e0 0BBF6 (v02    Xen      HVM 00000000 INTL 20090123)
ACPI: FACS 00000000fc0035a0 00040
ACPI: APIC 00000000fc00f360 000D8 (v02    Xen      HVM 00000000 HVML 00000000)
ACPI: HPET 00000000fc00f4b0 00038 (v01    Xen      HVM 00000000 HVML 00000000)
ACPI: WAET 00000000fc00f4f0 00028 (v01    Xen      HVM 00000000 HVML 00000000)
ACPI: SSDT 00000000fc00f520 00031 (v02    Xen      HVM 00000000 INTL 20090123)
ACPI: SSDT 00000000fc00f560 00031 (v02    Xen      HVM 00000000 INTL 20090123)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000110000000
Bootmem setup node 0 0000000000000000-0000000110000000
  NODE_DATA [000000000000c000 - 000000000003ffff]
  bootmap [0000000000040000 -  0000000000061fff] pages 22
(8 early reservations) ==> bootmem [0000000000 - 0110000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000201faa4]    TEXT DATA BSS ==> [0001000000 - 000201faa4]
  #3 [0036f9c000 - 0037fef395]          RAMDISK ==> [0036f9c000 - 0037fef395]
  #4 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
  #5 [0002020000 - 00020200d0]              BRK ==> [0002020000 - 00020200d0]
  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #7 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
found SMP MP-table at [ffff8800000fbba0] fbba0
 [ffffea0000000000-ffffea0003bfffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00110000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x0000009e
    0: 0x00000100 -> 0x000f0000
    0: 0x00100000 -> 0x00110000
On node 0 totalpages: 1048477
  DMA zone: 56 pages used for memmap
  DMA zone: 105 pages reserved
  DMA zone: 3836 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 964664 pages, LIFO batch:31
  Normal zone: 896 pages used for memmap
  Normal zone: 64640 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 15 CPUs, 13 hotplug CPUs
nr_irqs_gsi: 48
Xen version 4.2.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000f0000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
Allocating PCI resources starting at f0000000 (gap: f0000000:c000000)
Booting paravirtualized kernel on Xen
NR_CPUS:4096 nr_cpumask_bits:15 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u131072
pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1033140
Policy zone: Normal
Kernel command line: ro root=LABEL=/ console=ttyS0 xen_blkfront.sda_is_xvda=1 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4032828k/4456448k available (5325k kernel code, 262540k absent, 161080k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:936
Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [ttyS0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2494.096 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.19 BogoMIPS (lpj=2494096)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: CPU feature rdtscp disabled on xen guest
CPU: CPU feature constant_tsc disabled on xen guest
CPU: CPU feature smep disabled on xen guest
CPU: CPU feature avx disabled on xen guest
mce: CPU supports 2 MCE banks
alternatives: switching to unfair spinlock
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
x2apic not enabled, IRQ remapping init failed
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Xeon(R) CPU E5-2670 v2 @ 2.50GHz stepping 04
Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node   0, Processors  #1
CPU: CPU feature rdtscp disabled on xen guest
CPU: CPU feature constant_tsc disabled on xen guest
CPU: CPU feature smep disabled on xen guest
CPU: CPU feature avx disabled on xen guest
Brought up 2 CPUs
Total of 2 processors activated (9976.27 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
  alloc irq_desc for 935 on node 0
  alloc kstat_irqs on node 0
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff]
pci 0000:00:01.1: reg 20: [io  0xc100-0xc10f]
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:00:03.0: reg 14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io  0x0010-0x001f]
pnp 00:03: [io  0x0022-0x002d]
pnp 00:03: [io  0x0030-0x003f]
pnp 00:03: [io  0x0044-0x005f]
pnp 00:03: [io  0x0062-0x0063]
pnp 00:03: [io  0x0065-0x006f]
pnp 00:03: [io  0x0072-0x007f]
pnp 00:03: [io  0x0080]
pnp 00:03: [io  0x0084-0x0086]
pnp 00:03: [io  0x0088]
pnp 00:03: [io  0x008c-0x008e]
pnp 00:03: [io  0x0090-0x009f]
pnp 00:03: [io  0x00a2-0x00bd]
pnp 00:03: [io  0x00e0-0x00ef]
pnp 00:03: [io  0x08a0-0x08a3]
pnp 00:03: [io  0x0cc0-0x0ccf]
pnp 00:03: [io  0x04d0-0x04d1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io  0x0000-0x000f]
pnp 00:04: [io  0x0081-0x0083]
pnp 00:04: [io  0x0087]
pnp 00:04: [io  0x0089-0x008b]
pnp 00:04: [io  0x008f]
pnp 00:04: [io  0x00c0-0x00df]
pnp 00:04: [io  0x0480-0x048f]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io  0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [io  0x03f0-0x03f5]
pnp 00:09: [io  0x03f7]
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: [io  0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io  0x10c0-0x1141]
pnp 00:0b: [io  0xb044-0xb047]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:03: [io  0x08a0-0x08a3] has been reserved
system 00:03: [io  0x0cc0-0x0ccf] has been reserved
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:0b: [io  0x10c0-0x1141] has been reserved
system 00:0b: [io  0xb044-0xb047] has been reserved
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16716k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1454485147.749:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7909
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CE7CD867C43A37F8
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [0] registered
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
ACPI: acpi_idle registered with cpuidle
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
GHES: HEST is not enabled!
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
Grant table initialized
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
XENBUS: Device with no driver: device/vfb/0
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
rtc_cmos 00:05: setting system clock to 2016-02-03 07:39:08 UTC (1454485148)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
xlblk_init: register_blkdev major: 202 
  alloc irq_desc for 934 on node 0
  alloc kstat_irqs on node 0
blkfront: xvda: barriers disabled
 xvda: xvda1
Refined TSC clocksource calibration: 2493.989 MHz.
Switching to clocksource tsc
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: 
dracut: Remounting /dev/disk/by-label/\x2f with -o relatime,ro
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/xvda1
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1454485150.878:2): selinux=0 auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Initialising Xen virtual ethernet driver.
  alloc irq_desc for 933 on node 0
  alloc kstat_irqs on node 0
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x415
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x415
platform microcode: firmware: requesting intel-ucode/06-3e-04
Microcode Update Driver: v2.00 , Peter Oruba
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present

Return To 2016-02-03 08:22 System Information